0402 290 290
24/7 Call us now

6 Steps to Water Softener Maintenance

plumberbrookvale water softener

For homes located in a geographical area, a water softener would be an essential appliance at home. Water softeners are obviously used to soften the hard water which contains minerals such as magnesium and calcium. However, these doesn’t last that long. The maximum life expectancy of a water softener is up to five years. In this matter, if you badly want to extend the life of your water softening system to avoid replacing it, you must be knowledgeable some tips regarding water softener maintenance. So, here are six easy steps in maintaining your water softener.

Step 1. Inspect the Salt Level

Salt is necessary for a water softener especially if you are using a salt based water softener. This is essential for regenerating the resin beads to ready them for softening. The resin beads would prevail inefficient if this process is not done.

Step 2. Regularly Add Salt

Each system requires a certain amount of salt that is necessary. In every appliance or gadget that you will purchase, it obviously comes with a manual, right? Through the use of the manual of the water softener system that you bought, you will be informed to up to what level or the amount of salt is needed. However, the common or the general rule is you need to add salt if it is already in an under half-full level.

Step 3. Select a salt to add

There are three types of salt that are commonly used in a water softener: Granular, Tablet and Block. You will be able to know what kind of salt will you use once read the guidelines in the manual. Information and other stuff that you need to know, it is all written in there. Nevertheless, without considering the manual, tablet salt is commonly used in water softener system since it dissolves easily and it will not accumulate debris in the brine tank.

Step 4. Carry Out Regular Inspections

Checking your system, appliances, etc. is necessary and must be a typical routine for owners to maintain its function. A water softener requires an inspection for every 2 – 3 months to avoid salt mushing and salt bridges in the brine tank. Salt bridges prevent salt from having a direct contact with water. With this, it can stop the regeneration of the resin beads and as a result, it can no longer soften the hard water.

Step 5. Break Up Salt Bridges

Salt bridges could indeed create a huge problem to your water softener system. However, there is a quick, easy and a temporary fix for this problem. It can be broken up by the use of a long broom handle. However, if a salt bridge occurs for the first time, it could continuously occur at a faster rate. By this means, cleaning the brine tank thoroughly would necessary as soon as possible.

Step 6. Clean the Brine Tank

Cleaning must be done routinely to extend the life of the system, appliance or things. Simply inspecting the system, though it helps in maintaining, is just a minimal way of keeping it. Traditional water softeners, depending on its condition and age, needs to be cleaned every 6 – 12 months. Cleaning the brine tank is done by simply draining and by emptying it annually. On the other side, non-electric water softener would require less or even no maintenance for a maximum of 5 – 10 years of function. This would also depend on the warranty of the system.

Contact Us

Location :

Servicing :

Book a Job Or Request For Expert Advise

Plumber Brookvale Payment Method